抽指加权宽带扇形叉指声表面波滤波器的等效电路分析

扇形换能器可以看成若干个沿孔径方向划分的均匀孔径换能器电端并联而成，根据梅森(Mason)等效电路模型以及由其延伸的混合场等效电路模型，推导出整个扇形换能器的导纳矩阵和频率响应，其中采用复阻抗模型考虑了叉指电极与自由表面的阻抗不连续的因素。本方法能够模拟指间反射、三次行程、指条寄生阻抗以及外围电路等对器件性能的影响；理论模拟与实验结果吻合。     

Analysis and implementation of cross sync period underwater acoustical positioning techniques for underwater targets

I.IlltroductionWhenanactiveunderwateracousticalpositioningsystemissearchingforanunderwatertarget,itisnecessaryforittocompleteatransmittingandreceivingcycIewithineachworkingperiodinordertofindoutthelocationofthetargetcorrectly.Forexample,whenanunder-wateracoustica1synchronouspositioningsystemistrackinganunderwatertargetwithagivensynchr0nizingperiod,thepropagati0ntimeofthepositioningsignaltravellingfr0mthetaJrgettothearrayofthesystemshouldbelessthanthesynchronizingperiod0therwisetargetdis-tance…     

Optical current transducer with bulk type Bi12SiO20 faraday sensor for power systems

Two types of optical current transducers (OCTs) have a bulk Faraday sensor inserted into the gap of an iron core and a porcelain insulator with optical fiber. The sensor consists of Bi₁₂SiO₂₀ (BSO) single crystal, a polarizer, and an analyzer. The OCTs satisfied the target performance requirement for fault location and metering and demonstrated maintained performance at some power utilities in Japan and the US. We have developed a fault location system that immediately detects the fault current with the OCTs, there by locating the fault section. The OCT can easily replace the existing support insulators for the disconnecting switch without any modifications to structure height or bus-bar. For metering requiring 0.3% class accuracy, use of a BSO with right optical rotatory power combined with BSO with left optical rotatory power results in a Faraday sensor with improved temperature characteristics. The OCT demonstrated 0.3% class accuracy for metering described in the current transformer Specifications of IEEE C57–13, 1993.     

Optical current transducers using flint glass fiber as the faraday sensor element

This paper describes development of the optical current transducers using flint glass fiber as the Faraday effect sensing element. Excellent polarization properties of the fiber with low birefringence are described, and the design and test data of a current transducer using the fiber manufactured for use in electric power facilities are reviewed. Experimental results on flexible characteristics of a scheme with round trip light transmission in the fiber is also reported.     

Pattern时延差编码四信道水声通信技术研究

本文所研究的是基于Pattern时延差编码（PDS）体制下的水声通信技术.PDS水声编码体制利用Pattern码片出现在码元窗的时延差值进行时延编码,通过码元分割,有效的降低了水声信道的多途干扰;通过频率分割划分四个通信信道,增加通信速率至1000bit/s.在接收端利用带通滤波器来实现通信信道分割,每个信道再应用拷贝相关器实现码元分割并估计出时延差值,完成译码.仿真实验表明,该系统适合于大量不同水声信道高可靠性工作,为水声通信网络化打下坚实基础.     

Frequency fine-tuning in Class IV flextensional transducers

Class IV flextensional transducers (FTs) are the best-known FTs in literature. These are light-weight projectors (compared to the conventional Tonpilz designs) with capability for high power delivery at low frequencies. The resonance frequencies of this type of transducers are known to be dominantly dependent on the characteristics of the outer shell than on the driver stack. Consequently, the method of achieving fine-tuning of the transducer by modifying the characteristics of the stack, as practiced in the case of Tonpilz designs, is not very effective. This paper describes a method for fine-tuning of the frequency of a Class IV FT, which involves only a modification of a pair of small components used for coupling the stack to the transducer. The effectiveness of the method is examined by finite element modelling using the package ATILA, in the case of a 3 kHz aluminium shell transducer. Experimental results are also presented.     

Properties of cat-eye modulating retro-reflector and its application with piezoelectric transducer

Piezoelectric cat-eye modulating retro-reflector (MRR) is the core component of an acousto-optic retro-identification system. The influence of the optical parameters (link distance l, lens focal length f and the detector diameter r) to the cat-eye effect was analyzed theoretically and experimentally. A piezoelectric cat-eye retro-identification (PCERI) system was built, and an information transmission ratio of 2 kHz was achieved which can satisfy an access control system.     

基于EKF的水下LD通信精对准控制算法

高速激光通信中接收机与光斑中心很难处于精对准状态,导致水下光通信链路难以稳定建立.首先采用蒙特卡洛仿真统计法分析激光光子在海水中传输的接收光强分布规律,再通过实验对接收端的光斑图像进行采样分析,利用曲线拟合得到接收器位置与接收光强的关系.仿真与实验结果表明:光束经过25 m的水下传输,接收光强分布仍近似为高斯分布.采用非线性估计算法(扩展卡尔曼滤波)与基本状态控制反馈理论,根据接收光强度估计接收器当前位置与最大光强处的距离,通过反馈算法实现接收端与光斑中心的主动跟踪对准.算法仿真结果显示,接收端对准误差在2 mm以下,稳定后接收效率超过98%.     

基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

Time reversal acoustic communication receivers: DSP implementation and fast channel estimation

A communication system is implemented on digital signal processors (DSPs) for the underwater acoustic environment. The implemented receiver uses time reversal multi-channel combining followed by a single-channel decision feedback equalizer. Periodic channel estimation is employed to track the channel fluctuations. These techniques are used to mitigate time-varying inter-symbol interference, which is the main challenge in the underwater acoustic channel at operating frequencies greater than 10 kHz. Various optimization tasks are performed to reduce the receiver computational complexity. A fast implementation of the matching pursuit algorithm is tested on the DSP platform. Its performance, in terms of accuracy and run-time, is compared with that of the basic matching pursuit algorithm. Experimental results of the transmission and demodulation of binary phase-shift keying signals at three different symbol rates were obtained in the local Delaware Bay. The low bit error rates demonstrate the effectiveness of our implementation.